Search for a command to run...
Hi, My name is Sam Lee and I am studying Embedded Engineering.
This is my very first blog article. I thought it would be a good idea to share my study journey. I usually use Obsidian to take notes, which has been great for organizing my knowledge, but it wasn't easy to share my journey. I thought it would be great to share my experiences as I work on some projects.
My current project is an egg incubator, and I would love to share my journey with you.
No comments yet. Be the first to comment.
Title: Combining Modules Content: Now that we have implemented all the modules for the functionalities, it's time to combine them. First, we need to make the machine controllable. Create three states for the egg incubator: Preparing Incubating Com...
Prepare a plastic board and a box I prepared a shoe box. We will make a hole in the box so that the inside of the box is visible. Next, create a small hole for the temperature sensor probe and a small space for the hairdryer (heater) to fit in.
This time, let's create a status display. Egg Incubator Current Status: Incubating Incubation Period: 15 days 3 hours Time to Hatch: 5 days 21 hours Hatching Progress: 71% Expected Hatch Day: May 10, 2024 Temperature: 38.5° C Heater: on/off Our goa...
Hatching an egg takes about 21 days. We will use an OLED to check how long the egg incubator has been running. Displaying it in a clear manner would be ideal. The OLED module we will use is the jmd0.96d-1 module. It looks like this and is also known...
In my previous post, I connected an AC Relay, an AC Voltage Source, and a Heater plug. Here’s a simple explanation of how I did it. First, prepare an extension cable. Cut it in half. Mark two spots in the middle (where I’m holding with my left hand...