Making Hardware - Incubator Box
Published
•1 min readCommand Palette
Search for a command to run...
Comments
Join the discussionNo comments yet. Be the first to comment.
More from this blog
6- Completion
Title: Combining Modules Content: Now that we have implemented all the modules for the functionalities, it's time to combine them. First, we need to make the machine controllable. Create three states for the egg incubator: Preparing Incubating Com...
Sep 17, 20245 min read
Controlling OLED part 2
This time, let's create a status display. Egg Incubator Current Status: Incubating Incubation Period: 15 days 3 hours Time to Hatch: 5 days 21 hours Hatching Progress: 71% Expected Hatch Day: May 10, 2024 Temperature: 38.5° C Heater: on/off Our goa...
Sep 13, 20247 min read
Controlling OLED
Hatching an egg takes about 21 days. We will use an OLED to check how long the egg incubator has been running. Displaying it in a clear manner would be ideal. The OLED module we will use is the jmd0.96d-1 module. It looks like this and is also known...
Sep 12, 202411 min read
How to Connect a Relay Circuit: A Step-by-Step Guide
In my previous post, I connected an AC Relay, an AC Voltage Source, and a Heater plug. Here’s a simple explanation of how I did it. First, prepare an extension cable. Cut it in half. Mark two spots in the middle (where I’m holding with my left hand...
Sep 11, 20241 min read